Welcome..., Good Morning...
Wednesday, October 24th, 2018 -  (UTC+7)
 
 

New Conventional Multi Parameter »

Home : Products : WTW : Laboratory & Field Instrumentation : Multi-Parameter Instruments : New Conventional Multi Parameter

  
Multi 3320

All-Rounder For pH/mV/ISE, Conductivity And Dissolved Oxygen: Multi 3320
For professional applications in surface water, ground water, waste water treatment, aqua culture,
in field process and laboratory :
- Measure and display up to two parameters at the same time
- For all conventional WTW single parameter sensors
- Universal application range
 

This universal meter supports highly precise measurements of electro chemical
standard parameters when performing spot measurements in field and process as well as in the laboratory. A large, bright backlit LCD display shows the
measurement value, temperature and additional information. The meter has the ability to collect large amounts of data. A large memory for 5000 GLP compliant data together with a time-controlled data logger with adjustable intervals makes them useful tools for long-term. A special ECO MODE supports extended operation time when performing long-term data collections.

And in case the battery has now power any more: when supplying new batteries the meter again starts logging. All data can be transferred via the unique waterproof USB interface to a PC or laptop.
Applications: Professional measurements in surface water, ground water, waste
water treatment plants, environmental spot measurements, laboratory

 

Technical data and specifications

Meter

Multi 3320

pH

-2.0 … 20.0 +/-0.1 pH

 

-2.00 … 20.00 +/-0.01 pH

 

-2.000 … 19.999 +/-0.005 pH

mV

+/- 1200.0 mV +/- 0.3 mV

 

+/- (2500 +/-1) mV

mV

+/- 1200.0 mV +/- 0.3 mV

 

+/- (2500 +/-1) mV

Temperature

-5.0 … 105.0 °C +/- 0.1 °C

CMC

yes

Calibration

1-, 2-, 3-, 4-, 5-point WTW Techn.

 

DIN, NIST add. 20 buffer sets

 

Meter

Multi 3320

Conductivity

0.00 … 1000 mS/cm +/- 0.5 % of v.

additionally

0.000 … 1.999 μS/cm. K= 0.01 cm-1

 

0.00 … 19.99 μS/cm. K= 0.1 cm-1

Specific resistance

0.00 … 20 MOhm cm

Cell constant

fixed 0.01 cm-1

 

 For calibration: 0.450 to 0.500 cm-1. 0.800 … 0.880

 

cm-1

 

Adjustable: 0.090 … 0.110 cm-1

 

0.250… 25.000 cm-1

Salinity

0.0 … 70.0 (acc. IOT)

Temperature

 

TDS

1 … 1999 mg/l, 0 to 199.9 g/l

Temperature

-5.0 … 105.0 °C +/- 0.1 °C

Plug

8 pin

Calibration

1 point

Tref

20 °C/25 °C

Temperature compensation

none, nlF, 0.000 … 3.000 %/K

Meter

only Multi 3320

Dissolved oxygen

 

Concentration*

0.00 … 20.00 mg/l +/- 0.5 % of v.

 

0 … 90 mg/L +/- 0.5 % of v.

Saturation*

0.0 …200.0 % +/- 0.5 % of v.

 

0 bis 600 % +/- 0.5 of v..

Partial pressure*

0 … 200.0 hPa, 0 bis 1250 hPa, je +/- 0.5% of v.

Temperature

0.0 … 50.0 °C +/- 0.1 °C

Calibration

CellOx/DurOx with OxiCal calibration vessels

 

Versus external standard

Built-in barometric sensor for calibration

Yes

 

General Specifications

Calibration memory Up to ten calibrations

AutoRead Automatic/manual

Celsius/Fahrenheit yes

Display Backlit LCD

Memory manual 200/5000 automatic

Logger manual/time controlled

IP class IP 67

Interface Mini USB-B

Power supply

4 x 1.5 V AA (part of delivery) or 4 x 1.2 V NiMHrechargeable

batteries

Continuous operation Up to 800 h without/ 100 h with backlit

Bookmark and Share

HTML Link:

BBCode Link:

To copy the link above, just click on the input box, right click and copy

 Send to a friend Printable version Give Rate
My Rate is:

Previous:

Next:

pH/cond 3320
 
 
 
Random »

Factors to consider when choosing your system…

Operating temperature required Combine any Optima thermostat with any refrigeration unit; consider the temperature range of the combination e.g. GA100 + R5 temperature range is 0 to 100°C. Cooling power required at that temperature e.g. if your operating temperature is 0°C, and you need 500W cooling power, you will need the R4 (or R5) ... more

Back to top
Back to top

PT. PROLABMAS MURNI SWADAYA
Sentra Niaga Puri Indah Blok T3-10
Jakarta 11610 - Indonesia
Telp: +62 (21) 581 8000, 581 9000
Fax: +62 (21) 581 6999

© 2010 - 2018 Alat Lab | Alat Laboratorium
Developed by: DuaCe.com