Welcome..., Good Morning...
Thursday, October 24th, 2019 -  (UTC+7)
 
 

Water Level »

Home : Products : GLOBAL WATER : Water Level

  
WL900 RADAR LEVEL TRANSMITTERS

Radar level transmitters are ideal for a variety of water and wastewater applications

FEATURES:

  • Accurate, non-contact measurement
  • Works in conditions where ultrasonic is not acceptable
  • Pulse radar measurement range 10” to 50’
  • Simple push-button calibration
  • Standard 4-20mA signal output
  • Optional RS485 digital output

Radar Level Transmitters Product Description

The WL900 Radar Level Transmitters offer a logical extension to ultrasonic devices, where application conditions are in need of non-contact liquid level measurement but ultrasonic level transmitter measurement is not acceptable.  The WL900 Radar Level Transmitters are ideal for a variety of water and wastewater applications where you have a reflective liquid that has a foaming surface, vapors, or dusty conditions beyond ultrasonic transmitter capabilities.  The Radar Level Transmitters are also unaffected by temperature, vacuums, pressure, methane, or CO2.

The WL900 Radar Level Transmitters use state-of-the-art radar pulse technology which provide accurate and reliable level measurements over their wide 10 inch to 50 foot range.  With their simple push-button calibration system, the WL900 Radar Level Transmitters are easy to set up and maintain on the bench or in the field by following simple instructions.  Simply aim the WL900 Radar Level Transmitters at your low range level set point and push the button to lock in the setting – do the same with the high level set point.  This may be done before permanently installing the Radar Level Transmitter by aiming at a wall and using a tape measure to determine your exact range.

The WL900 Radar Level Transmitter's rugged NEMA 4 (IP65) housing is available in either aluminum or 316L stainless steel for corrosive environments.  A standard 2” NPT(M) process connection allows for quick and versatile installation of the Radar Level Transmitter.  The Radar Level Transmitter's polypropylene antenna rod is virtually corrosion proof.

Radar Level Transmitters Specifications

Radar Level Transmitter Power
     AC:  115 VAC, 60 Hz (± 20%), 1.7 VA
     DC:  12 to 30 VDC, 0.07 Amps max. @ 24 VDC
Radar Level Transmitter Outputs
     Signal:  4-20 mA, 6.1 uA resolution; 750 ohms
     Communication:  RS232
Accuracy:  ±0.25% of maximum sensor range (in air)
Frequency:  6.3 GHz
Transmitter Power:  50 uW average
Calibration:  Push-button or optional programmable
Antenna:  Polypropylene over dielectric rod
Beam Angle:  12 degrees
Operating Temp:  -40°C to 60°C (-40°F to 140°F)
Operating Pressure:  150 psi max
Installation Category:  Class II
Process connection:  2” NPT
Conduit Entry:  1/2” NPT standard
Housing:  Aluminum or 316L stainless steel
Ingress Protection:  NEMA 4 (IP65)
Approvals:  FCC Part 15 - low-power communication device
Weight:  3.6Lbs (1.63Kg)
Dimensions:  4” diameter x 18” long (10cm dia. x 45.7cm long)

Radar Level Transmitters Options

WL900-AC Radar Level Transmitter
Power: 115VAC (60Hz), Enclosure: Aluminum
WL900-DC Radar Level Transmitter
Power: 12 to 30 VDC, Enclosure: Aluminum
WL901-AC Radar Level Transmitter
Power: 115VAC (60Hz), Enclosure: Stainless Steel
WL901-DC Radar Level Transmitter
Power: 12 to 30 VDC, Enclosure: Stainless Steel

Bookmark and Share

HTML Link:

BBCode Link:

To copy the link above, just click on the input box, right click and copy

 Send to a friend Printable version

Previous:

WL500 WATER LEVEL SOUNDER
WL650 SONIC WATER LEVEL METER
WA600 WATER LEVEL ALARM SENSOR
WA100 LIQUID LEVEL FLOAT SWITCH
WA170 MECHANICAL FLOAT SWITCH

Next:

WL400 WATER LEVEL SENSOR
WL450 ALL STAINLESS STEEL WATER LEVEL TRANSMITTERS
WL430 SEWAGE LIFT STATION WASTEWATER LEVEL SENSOR
WL700 ULTRASONIC WATER LEVEL SENSOR Non-Contact Water Level Measurement
WL750 ULTRASONIC LEVEL TRANSMITTERS
 
 
 
Random »

Clinical Refractometer MASTER-SUR/NM

The MASTER-SUR/NM is designed for clinical purposes: "Serum Protein", "Specific Gravity of Urine" and "Refractive Index". The plastic body model is designed to be resistant salty and acidic samples. The MASTER-SUR/NM is a good alternative choice when the water resistant feature is not a priority and the Temperature Compensation will be ... more

Back to top
Back to top

PT. PROLABMAS MURNI SWADAYA
Sentra Niaga Puri Indah Blok T3-10
Jakarta 11610 - Indonesia
Telp: +62 (21) 581 8000, 581 9000
Fax: +62 (21) 581 6999

© 2010 - 2019 Alat Lab | Alat Laboratorium
Developed by: DuaCe.com