Welcome..., Good Evening...
Monday, December 18th, 2017 -  (UTC+7)
 
 

Special Substrates for Coatings Tests »

 Home
 Products
    LENETA
       Special Substrates for Coatings Tests

Sort Order: Date (ID) ASC DESC | Title ASC DESC

Release Charts


For rapid and precise hiding power measurements.

These charts have a unique surface which is readily wetted by waterborne or solventborne paints, but from which the dried film can easily* be stripped with adhesive tape. The stripping feature permits the dry film weight on a measured area to be determined precisely by weighing on ... more


Gray Scale Charts


For Visual Hiding Power Ratings

These are sealed paint test charts with six stripes on a white field, ranging in shade from very light gray to black. The stripes are numbered 1 to 6, representing uniform steps of increasing contrast. The hiding power of the applied coatings is rated as the number of the darkest stripe that is ... more


Wall-Matte Charts

Large-area matte finish test surfaces for practical laboratory application testing of wall paints. These charts are coated with a flat finish similar in texture and “tooth” to a typical trade sales flat wall paint. Paints can be applied by brush or roller with assurance that there will be no surface “skid” during ... more


Spray Strips


Hiding Power Charts for OEM Coatings

These are used by industrial coatings laboratories, principally those involved with the automotive industry, to measure the hiding power of spraying enamels. The chart is attached to a steel panel and the test coating sprayed to produce a “wedge” varying from thin at one end to ... more


Spray Monitors

Self-Adhering Hiding Power Labels These are pressure sensitive labels with a hiding power test pattern and a sealed, solvent-resistant surface. They are used primarily with metal panels on which the uniform surface provides no visual clue as to the thickness of an applied paint film. When placed on such a surface the Monitor presents ... more


Birchwood

Wood Panels - Birch : This type of hardwood is light in color with an attractive grain, making it particularly suitable for color matching and demonstration of stains. Birch Plywood - 5/32 in (4 mm) thick Form No. Size Box Quantity Boxes Per Case Weight Per Box inches mm R1A 5-1/2 x ... more


Upson Board

Upson Board - Fiberboard Panels Fiberboard panels, 3/16 inch thick, provide a surface appropriate for test applications of wall paint. Form No. Size Box Quantity Weight Per Box inches mm R6-612 6 x 12 152 x 305 150 40 lb R6-912 9 x 12 229 x 305 100 40 ... more


Special Substrates - Clear Polyester

Clear Polyester This clear film can be used as a substrate for the application of a coating and viewed for transmitted appearance properties including color, gloss and transparency, or placed over a black and white background for evaluation of hiding power. In addition, it is used as an overlay to protect a drawdown after drying, without ... more


Aluminium Charts

Alu-Cards - Aluminum foil laminated to paperboard panels These are low cost metallic substrates to replace expensive solid metal panels when the primary interest is in appearance. The test surface has a high metallic luster. The cards are 18 mils (0.46 mm) thick and have a 1/4 inch (6.4 mm) diameter hole punched in one end. In addition ... more


Glass Substrates

Carrara* Glass Panels - Approximately 0.25 inch (6mm) thick Black glass is used in widely referenced high-precision ASTM Method D 2805, and related hiding power test methods. After measuring the reflectance R0 of the dry film, a defined area is scraped from the glass and weighed to obtain the spreading rate or original wet film thickness. Rof ... more


Release Paper

Release Paper - For preparing free films of organic coatings   This paper is sealed on both sides, one side glossy and the other matte. The glossy side has a silicone finish with balanced release, to avoid excessive crawling of solventborne or waterborne coatings, while permitting easy stripping of dried films. It is recommended in ASTM ... more


Sort Order: Date (ID) ASC DESC | Title ASC DESC

HTML Link:

BBCode Link:

To copy the link above, just click on the input box, right click and copy

 
 
 
Random »

In-line Refractometer PRM-100α

The unit measures the refraction of light generated between the prism surface and a liquid sample. The PRM-100α is upgraded from the PRM-85 in the following aspects: • Wider than ever 0.0 to 100.00% Brix range • Improved measurement accuracy: Brix ±0.05%, nD ±0.00010 • Two options for setting the minimum ... more

Back to top
Back to top

PT. PROLABMAS MURNI SWADAYA
Sentra Niaga Puri Indah Blok T3-10
Jakarta 11610 - Indonesia
Telp: +62 (21) 581 8000, 581 9000
Fax: +62 (21) 581 6999

© 2010 - 2017 Alat Lab | Alat Laboratorium
Developed by: DuaCe.com